rockstart
10-23 01:56 PM
Glad to see this law. Also this law gives me hope for recapture. No one knew about this law was in transit and without any hitches this one passed all the way. So for those who feel that recapture cannot pass can rethink their position based on this new fact.
wallpaper Jennifer Lopez is wearing her
martinvisalaw
06-04 05:37 PM
You don't need to be working in the US while the AOS is pending. You just need to have the job when permanent residence is approved, or to have a job in the "same or similar occupational classification."
simple1
05-11 02:20 PM
I already did, thanks.
Kindly note:
This thread is a question to Lawyer requesting advice from IV forum attorney.
This is not the original thread for member / donor discussion.
Member thread: http://immigrationvoice.org/forum/showthread.php?t=25432
Donor thread: http://immigrationvoice.org/forum/showthread.php?p=340449#post340449
http://www.visalaw.com/teleconform.html
Please post and email this question at the above teleconf..
I already did.
Kindly note:
This thread is a question to Lawyer requesting advice from IV forum attorney.
This is not the original thread for member / donor discussion.
Member thread: http://immigrationvoice.org/forum/showthread.php?t=25432
Donor thread: http://immigrationvoice.org/forum/showthread.php?p=340449#post340449
http://www.visalaw.com/teleconform.html
Please post and email this question at the above teleconf..
I already did.
2011 celebrity hair, 15 years of
pappu
05-11 12:51 PM
can we listen to this program online?
more...
GCBy3000
02-07 09:54 AM
You are not married to your job if you are in H1. This is my whole point to be in H1. I MAY BE WRONG.
If you are in H1 and having a PD of xxx date and if you decide to switch to another company by transferring your H1 into different position, you can still carry your PD with you for the new position eventhough it is totally different position. This is my understanding. If this is true, you can go up the ladder ifyou are in h1. If you invoke EAD and use 485, you cannot do this.
Only other way to do this when you are in EAD is to switch back to H1. Again, you should have left some time in your original 6 years of H1 to do this.
It is purely upto you to decide what do u want. If u r planning to stick with the same company that has your H1B, then no need to pursue EAD option. But if you are planning to get out of your current company and pursue different opportunity, then you can use ur EAD.
No matter what the status(H1B or EAD) you are in, you need to be employed in the same position or a similar position as in your Labor Certification. If your Labor Certification says you are a Programmer you cant be a Project Mgr in EAD. Till you get your GC, you are compulsorily married to your profession and title.
If you are in H1 and having a PD of xxx date and if you decide to switch to another company by transferring your H1 into different position, you can still carry your PD with you for the new position eventhough it is totally different position. This is my understanding. If this is true, you can go up the ladder ifyou are in h1. If you invoke EAD and use 485, you cannot do this.
Only other way to do this when you are in EAD is to switch back to H1. Again, you should have left some time in your original 6 years of H1 to do this.
It is purely upto you to decide what do u want. If u r planning to stick with the same company that has your H1B, then no need to pursue EAD option. But if you are planning to get out of your current company and pursue different opportunity, then you can use ur EAD.
No matter what the status(H1B or EAD) you are in, you need to be employed in the same position or a similar position as in your Labor Certification. If your Labor Certification says you are a Programmer you cant be a Project Mgr in EAD. Till you get your GC, you are compulsorily married to your profession and title.
insbaby
11-21 11:07 PM
Similar Question:
I have not left the USA for the last 5 years. I have since extended my H1- thrice. So I have 3 new I-94's and the old one that is stapled in the passport. I-94 is taken at the airport when you depart, to record your departure and also to see if you were residing legally on a valid stay. Question: They always take the one stapled in your pasport. (That in my case shows an expired stay.) so should I give them the latest I-94 when I depart?.
You should take a copy of the I-797's and detach the portion of it and staple with the existing I-94. If you read the I-797 carefully, they mentioned it to put it in your passport, means, all I-94s must be handed over before you leave. Sometimes, you may have different I-94 numbers, so it is better to give all I-94's.
You can not do anything by retaining those I-94s after you leave, just take a copy and give them back.
BUT, make sure that it is in valid period. If you have got a new I-797, where the period has not started, DO NOT GIVE IT BACK, take it with you to the consulate. Give I-94's only up to the period you are leaving.
I have not left the USA for the last 5 years. I have since extended my H1- thrice. So I have 3 new I-94's and the old one that is stapled in the passport. I-94 is taken at the airport when you depart, to record your departure and also to see if you were residing legally on a valid stay. Question: They always take the one stapled in your pasport. (That in my case shows an expired stay.) so should I give them the latest I-94 when I depart?.
You should take a copy of the I-797's and detach the portion of it and staple with the existing I-94. If you read the I-797 carefully, they mentioned it to put it in your passport, means, all I-94s must be handed over before you leave. Sometimes, you may have different I-94 numbers, so it is better to give all I-94's.
You can not do anything by retaining those I-94s after you leave, just take a copy and give them back.
BUT, make sure that it is in valid period. If you have got a new I-797, where the period has not started, DO NOT GIVE IT BACK, take it with you to the consulate. Give I-94's only up to the period you are leaving.
more...
govindk
10-30 11:02 PM
My EAD is pending for more than 90 days now.My received date is 27th July and Notice date is 31st Aug. I called USCIS and told that my application is pending for more than 90 days. The Level 1 officer acknowledged the fact and escalated the call to Level 2. The level 2 IO was very rude and simply deny to accept the fact that 90 days are over. She simply said that the USCIS is counting 90 days from the notice date not the received date. I told her that It is mentioned on the USCIS website that 90 days are from the received date. The IO officer scolded at me and said if I don't believe her words, then do not call USCIS.:mad:
I guess there is no point calling USCIS and checking status on EAD. I am hoping that the situation will improve and i will soon get EAD card.
I guess there is no point calling USCIS and checking status on EAD. I am hoping that the situation will improve and i will soon get EAD card.
2010 Jennifer Lopez Hairstyles
smuggymba
10-08 05:14 PM
GCNirvana007 - Who filed you PERM? Who provided you with approved I-140? Who filed ur GC? ....company A.............right.............so u have to work for company A and yes u r obligated legally from USCIS perspective to work with them. Don't tell me u don't know this. Going thru GC process, one almost becomes an immigration lawyer so you should know this if u don't already.
Recent H1-B company B has nothing to do with GC.
Bottomline - Why did u file GC in EB category? ANSWER - To work for that employer A.
Now u r saying something about company C running ur payroll.
Ok. So whoever runs my payroll is my employer. Lets say its Company C.
Question is
Am I obligated to Company A in any way?
Am I obligated to Company B which had my recent H1B?
Based on the answers i am assuming no but will wait to hear from you guys.
Recent H1-B company B has nothing to do with GC.
Bottomline - Why did u file GC in EB category? ANSWER - To work for that employer A.
Now u r saying something about company C running ur payroll.
Ok. So whoever runs my payroll is my employer. Lets say its Company C.
Question is
Am I obligated to Company A in any way?
Am I obligated to Company B which had my recent H1B?
Based on the answers i am assuming no but will wait to hear from you guys.
more...
gconmymind
11-05 03:50 AM
Situation - During the month of July, I filed my 485 when all categories were current. Got my receipt too. Missed wife's application because her papers were not ready. Now priority dates have retrogressed again.
Saving grace - Our H1/H4 are in order with many long years left on them.
Question - Can I file my wife 485 now as a dependent, even though "my" PD is not current yet. The core point is that, does the concept of PD applies to the dependent 485 applications too?
I am in almost the same boat, with the exception that my receipts have not arrived yet!! :mad:
Only saving grace is that I am EB2 and my priority date is May '04, so hoping the bulletin to be current for me in a few months so I can file for my wife..keeping my fingers crossed...
Saving grace - Our H1/H4 are in order with many long years left on them.
Question - Can I file my wife 485 now as a dependent, even though "my" PD is not current yet. The core point is that, does the concept of PD applies to the dependent 485 applications too?
I am in almost the same boat, with the exception that my receipts have not arrived yet!! :mad:
Only saving grace is that I am EB2 and my priority date is May '04, so hoping the bulletin to be current for me in a few months so I can file for my wife..keeping my fingers crossed...
hair jennifer lopez hair color
jay1ram2
11-23 02:19 PM
Well Said.
more...
snthampi
02-25 04:51 PM
WOW. Stealing $30 worth of stuff makes her so bad?
I wonder what stealing from an employer by leaving early from work would mean.
You are beyond hopeless.
Your comparison is retarded. Not everyone is like you and cheat their employer. Most people are honest in what they do.
I wonder what stealing from an employer by leaving early from work would mean.
You are beyond hopeless.
Your comparison is retarded. Not everyone is like you and cheat their employer. Most people are honest in what they do.
hot jennifer lopez hair fringe
speedo
08-14 07:34 PM
when is your appointment? what city?
more...
house jennifer lopez hair 2011.
rbalaji5
02-09 03:48 PM
Hi,
I have gone to India last Nov (2008) and got the H1B stamping upto Aug 2010. while entering the U.S due to the expiry of passport, I got the I-94 upto July 2009. Now I need extend my I-94.
I am planning to go out of country to get the I-94. Shall I go to Mexico to get the new I-94 ?. Note I have the stamping.
Shall I fly or drive ?. Which is the preferred way to get the new I-94. ? Any one did like this before ?. Your help is appreciated.
Thanks.
I have gone to India last Nov (2008) and got the H1B stamping upto Aug 2010. while entering the U.S due to the expiry of passport, I got the I-94 upto July 2009. Now I need extend my I-94.
I am planning to go out of country to get the I-94. Shall I go to Mexico to get the new I-94 ?. Note I have the stamping.
Shall I fly or drive ?. Which is the preferred way to get the new I-94. ? Any one did like this before ?. Your help is appreciated.
Thanks.
tattoo head of hair care regime,
chanduv23
07-11 03:06 PM
I am seriouly looking out for a job as currently on bench from last one month and my employer doesn't pay the bench salary. Currently I am on EAD with my GC sponsering employer. I would appreciate if any of you pls. reply this post. My question is,
If I joined a new employer using EAD-AC21 (as 11 month passed of my I-485) which is very small employer (currently have about 35 employees only), would it cause a problem in my GC process approval? I mean, do you think USCIS may create any RFC as I have join the very small employer, may ask any financial document to declare? Can you pls. tell me what are the potential problems my come in this situation?
Pls. help, your reply will be highly appreciable?
As long as you are employed, and company is paying you decent salary (atleast salary mentioned on the L/C) you are fine, you must be employed at time of RFE/NOID etc..
If I joined a new employer using EAD-AC21 (as 11 month passed of my I-485) which is very small employer (currently have about 35 employees only), would it cause a problem in my GC process approval? I mean, do you think USCIS may create any RFC as I have join the very small employer, may ask any financial document to declare? Can you pls. tell me what are the potential problems my come in this situation?
Pls. help, your reply will be highly appreciable?
As long as you are employed, and company is paying you decent salary (atleast salary mentioned on the L/C) you are fine, you must be employed at time of RFE/NOID etc..
more...
pictures Actress/ Singer Jennifer Lopez
cmphr
03-29 02:06 PM
My friend's PERM got approved in 5 days in Dec '09. His I-140 got approved in 3 weeks in March '10. This could be an exceptional case as I have not seen any other such approvals..
dresses jennifer lopez hair color. mariner5555. 05-14 04:24 PM. 2009------we can see
lvaka
07-18 10:49 AM
This is like giving them a small window to file within 10 days in the old rate other wise....pay the big chunk.
Good tactics....it will be difficult for the people who do not have any medical appointments and other documents that need to come from other countries !!
I think you missed the USCIS update. You can file till Aug 17th. So its the same amount of time one month from now.
Good tactics....it will be difficult for the people who do not have any medical appointments and other documents that need to come from other countries !!
I think you missed the USCIS update. You can file till Aug 17th. So its the same amount of time one month from now.
more...
makeup look were Jennifer Lopez,
chanduv23
12-09 08:17 AM
Good Morning
girlfriend Jennifer Lopez Hair
herns
03-07 12:02 PM
So, as someone already said, if your approved 140 isn't revoked within 180 days and your 485 isn't adjudicated as well, you are ok. You may want to find a job soon though so you don't have trouble transferring
With this present economic status I think a lot of I-485 that is still pending faces layoffs or had been laid off, particularly in my field in architecture. I just wish It wont happen to those who have waited for so long to get their green card.
I was laid off last Feb. 19/ 09. I had my I-140 approved last Aug 2006 and my I-485 is still pending for more than a year now.
The day before I got laid off from work, I talked to the immigration personnel in charge in my company and he told me that they wont cancel my I-485 in case I get laid off and advice me to inform them when I found a new sponsor to carry over my I-485.
Since the law is not clear how long can I stay unemployed, would there be something to worry in my present situation? I just need an answer that could lift up my hope.Just like everybody else, Ive waited for so long for my green card, and when I landed this big company, I thought this is where I would get my Green card but that hope was shattered when I got laid off. There is no job out there and it could drag on for months.
For those who got their Green card and those who are blessed to be born in this great country, your advice or input in my situation is very much appreciated.
Thank you.
With this present economic status I think a lot of I-485 that is still pending faces layoffs or had been laid off, particularly in my field in architecture. I just wish It wont happen to those who have waited for so long to get their green card.
I was laid off last Feb. 19/ 09. I had my I-140 approved last Aug 2006 and my I-485 is still pending for more than a year now.
The day before I got laid off from work, I talked to the immigration personnel in charge in my company and he told me that they wont cancel my I-485 in case I get laid off and advice me to inform them when I found a new sponsor to carry over my I-485.
Since the law is not clear how long can I stay unemployed, would there be something to worry in my present situation? I just need an answer that could lift up my hope.Just like everybody else, Ive waited for so long for my green card, and when I landed this big company, I thought this is where I would get my Green card but that hope was shattered when I got laid off. There is no job out there and it could drag on for months.
For those who got their Green card and those who are blessed to be born in this great country, your advice or input in my situation is very much appreciated.
Thank you.
hairstyles Jennifer Lopez#39;s beehive updo
Steve Mitchell
October 12th, 2003, 09:31 PM
I love that dandelion. It has an "otherworlddy" look to it.
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
sathyaraj
12-12 12:40 PM
Do not worry too much about your role change, because when you are using AC21 you need to be in same or similar job as specified in ONET job codes.
If you are a systems analyst, then you can potential work as a business analyst also. As the job duties for systems analyst includes some of the activities performed by BA. It is the job duties which have more waitage.
http://www.onetcodeconnector.org/ccreport/15-1051.00
If you refer the link above, all software jobs (except Management) starts with 15.XXXX as job code. So long as you stay with that you are fine.
If you are a systems analyst, then you can potential work as a business analyst also. As the job duties for systems analyst includes some of the activities performed by BA. It is the job duties which have more waitage.
http://www.onetcodeconnector.org/ccreport/15-1051.00
If you refer the link above, all software jobs (except Management) starts with 15.XXXX as job code. So long as you stay with that you are fine.
No comments:
Post a Comment